Condenser etiketine sahip kayıtlar gösteriliyor. Tüm kayıtları göster
Condenser etiketine sahip kayıtlar gösteriliyor. Tüm kayıtları göster

9 Temmuz 2018 Pazartesi

Types of Cooling Systems

Types of Cooling Systems
Air conditioning, or cooling, is more complicated than heating. Instead of using energy to create heat, air conditioners use energy to take heat away. The most common air conditioning system uses a compressor cycle (similar to the one used by your refrigerator) to transfer heat from your house to the outdoors.
Picture your house as a refrigerator. There is a compressor on the outside filled with a special fluid called a refrigerant. This fluid can change back and forth between liquid and gas. As it changes, it absorbs or releases heat, so it is used to “carry” heat from one place to another, such as from the inside of the refrigerator to the outside.

 And the process gets quite a bit more complicated with all the controls and valves involved. But its effect is remarkable. An air conditioner takes heat from a cooler place and dumps it in a warmer place, seemingly working against the laws of physics. What drives the process, of course, is electricity — quite a lot of it, in fact.

Central Air Conditioners and Heat Pumps
Central air conditioners and heat pumps are designed to cool the entire house. In each system, a large compressor unit located outside drives the process; an indoor coil filled with refrigerant cools air that is then distributed throughout the house via ducts. Heat pumps are like central air conditioners, except that the cycle can be reversed and used for heating during the winter months. (Heat pumps are described in more detail in the heating section.) With a central air conditioner, the same duct system is used with a furnace for forced warm-air heating. In fact, the central air conditioner typically uses the furnace fan to distribute air to the ducts.

Air conditioners and heat pumps use the refrigerant cycle to transfer heat between an inside unit and an outside uint. Heat pumps differ from air conditioners only in the special valve that allows the cycle to reverse, providing either warm or cool air to the inside.

Room Air Conditioners
Room air conditioners are available for mounting in windows or through walls, but in each case they work the same way, with the compressor located outside. Room air conditioners are sized to cool just one room, so a number of them may be required for a whole house. Individual units cost less to buy than central systems.

Evaporative Coolers
Evaporative coolers, sometimes called swamp coolers, are less common than vapor compression (refrigerant) air conditioners, but they are a practical alternative in very dry areas, such as the Southwest. They work by pulling fresh outside air through moist pads where the air is cooled by evaporation. The cooler air is then circulated through a house. This process is very similar to the experience of feeling cold when you get out of a swimming pool in the breeze. An evaporative cooler can lower the temperature of outside air by as much as 30 degrees.
They can save as much as 75% on cooling costs during the summer because the only mechanical component that uses electricity is the fan. Plus, because the technology is simpler, it can also cost much less to purchase than a central air conditioner — often about half.
A direct evaporative cooler adds moisture to a house, which could be considered a benefit in very dry climates. An indirect evaporative cooler is a little different in that the evaporation of water takes place on one side of a heat exchanger. House air is forced across the other side of the heat exchanger where it cools off but does not pick up moisture. Both types begin to lose their effectiveness with increasing humidity, because humid air is less able to carry additional moisture.
For evaporative coolers to do their job, they must be the right size. The cooling capacity of an evaporative cooler is measured not in the amount of heat it can remove (Btu), but in the fan pressure required to circulate the cool air throughout the house, in cubic feet per minute (cfm). A good rule is to figure the cubic square footage of your house and divide by 2. For example, a 1,500-square-foot house with 8-foot-high ceilings would require a 6,000 cfm cooler.

Ductless Mini-Split Air Conditioners
Mini-split systems, very popular in other countries, can be an attractive retrofit option for room additions and for houses without ductwork, such as those using hydronic heat (see the heating section). Like conventional central air conditioners, mini-splits use an outside compressor/condenser and indoor air handling units. The difference is that each room or zone to be cooled has its own air handler. Each indoor unit is connected to the outdoor unit via a conduit carrying the power and refrigerant lines. Indoor units are typically mounted on the wall or ceiling.
The major advantage of a ductless mini-split is its flexibility in cooling individual rooms or zones. By providing dedicated units to each space, it is easier to meet the varying comfort needs of different rooms.
By avoiding the use of ductwork, ductless mini-splits also avoid energy losses associated with central forced-air systems.
The primary disadvantage of mini-splits is cost. They cost much more than a typical central air conditioner of the same size, where ductwork is already in place. But, when considering the cost and energy losses associated with installing new ductwork for a central air conditioner, buying a ductless mini-split may not be such a bad deal, especially considering the long-term energy savings. Talk with your contractor about what option would be most cost-effective for you.

www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

6 Temmuz 2018 Cuma

Condenser, Evaporator, and Compressor

Condenser, Evaporator, and Compressor

The condenser is one of three primary elements in your air conditioning system. The other two, the evaporator and compressor, are also important. To understand how the condenser works, it’s important to understand the other two as well.

• Evaporator: The system starts in home with inside air being blown over evaporator coils. These coils contain low-pressure refrigerant which absorbs the heat from the air and converts into a high-pressure gas.
• Compressor: The gas is transferred into the compressor, which is in the outside unit. Here, it’s compressed to help convert it back into a liquid so it can continue the cooling cycle. This produces extra heat.
• Condenser: The condenser is a set of coils, also located inside the outdoor unit. Here, a fan blows across the coils, dissipating the heat from the refrigerant inside them and allowing it to convert back into a liquid, at which point it’s sent back inside to start the process over again.

Without the condenser, the refrigerant would retain its heat and the process would not work. Therefore, it’s important to be able to tell if the condenser is malfunctioning or broken.


Diagnosing Condenser Problems

Often, the problem may not be with the condenser coils themselves, but with the fan or motor in the outdoor unit. The following signs can let you know if the condenser is broken:

• Air conditioner blows warm air inside.
• Outdoor condenser fan doesn’t run.
• Refrigerant leaks from outdoor unit.

What type of AC systems are available?

What type of AC systems are available?

Cooling Only Split-System
A split system is a combination of an indoor air handling unit and an outdoor condensing unit. The indoor air handling unit contains a supply air fan and an air-to-refrigerant heat exchanger (or cooling coil), and the expansion device. The outdoor condensing unit consists of a compressor and a condenser coil. Split-systems are typically found in residential or small commercial buildings. These systems have the highest energy efficiency rating (EER) of all the available AC systems. Manufacturers are required to take the EER rating a step further and provide a seasonal energy efficiency rating (SEER) for use by consumers. SEER ratings vary widely and range from 10 to 20. The higher the SEER rating, the more efficient the AC system operates. If heating is required, an alternate method of heating the interior of the building must be used, usually in the form of electric or gas heating.
Cooling Only Packaged-System
A packaged system is a single unit combining all the components described in the split system. Since the unit is a package, it must be placed outside the building and indoor air is “ducted” from the building to the packaged system and back through an air distribution system. These units typically have SEER rating from 10 to 18. If heating is required, an alternate method of heating the interior of the building must be used, usually in the form of electric or gas heating.
Heat Pump
Heat pumps are similar to cooling only systems with one exception. A special valve in the refrigeration piping allow the refrigeration cycle to be operated in reverse. A cooling only system cools the indoor air and rejects heat to the outdoors. A heat pump can also cool the indoor air, but when the valve is reversed, the indoor air is heated. A supplementary electric resistance heater may also be used to assist the heat pump at lower outdoor temperatures. In colder climates, heat pumps require a defrost period. During defrost times the electric heater is the only means of heating the interior of the building. These units are manufactured as either split or packaged systems.
Chilled Water System
In a chilled water system, liquid water is pumped throughout the building to “chilled water coils”. Since the liquid water needs to be at a cold temperature, a “cooling plant” is required. The plant is typically referred to as a chiller plant. Vapor compression equipment in the plant, similar to that described in “How does my AC work”, cool water to a cold temperature and pump the cold water to air-to-water heat exchangers where needed.
Window Air Conditioners
As the name implies, a window air conditioner is typically installed in a window or custom opening in a wall. The Window AC can only cool small areas and are not intended to provide cooling to multiple rooms or zones. These air conditioners are manufactured as cool only or can provide both cooling and heating. An optional damper in the unit can provide fresh outdoor air if necessary.
Packaged Terminal Heat Pump
Packaged terminal heat pumps (PTHP) are are similar to a window-mounted air conditioner. These units are typically installed in a sleeve passing through the outdoor wall of an apartment, hotel, school classroom, etc. PTHPs are completely self contained and require only an electrical connection in addition to the opening in the building shell. They use the outdoor air as the heat source in winter and as a heat sink in summer. They also can provide ventilation air. Flexibility and lower installed cost are the primary advantages of the PTHP. Disadvantages include in-room maintenance, higher operating cost, relatively short life, imprecise "on-off" temperature control, and they can be rather noisy.

www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40



+90 553 343 50 40

What does the Expansion Valve do in an Air Conditioning System

What does the Expansion Valve do in an Air Conditioning System
The modern air conditioner is quite a marvel of engineering. The complex working of its components is the reason that only professionals can effectively diagnose and repair a malfunctioning air conditioner.
One of the key components allowing an air conditioner to work is a part called the expansion valve. Without this valve, an AC would not be able to draw sufficient heat from the inside of a home.

How the expansion valve helps cool down your home
In order to explain the purpose of an expansion valve requires first explaining the basics of how refrigerant works in an air conditioner. Refrigerant is a heat transference fluid that shifts between liquid and gaseous state, absorbing and releasing heat as it does so. When the refrigerant moves through the outdoor condenser coil, it releases heat to the outside. Cooled down, it then moves toward the indoor evaporator where it absorbs heat.
However, at the point after leaving the condenser, the refrigerant—which is in a high-pressure liquid form—is still too hot to effectively go carry out the process of evaporation that will draw heat out of the indoor air. This is where the expansion valve does its job: the valve is designed to remove pressure from the refrigerant and rapidly cool it down into a cold gas. The valve doesn’t remove heat, only pressure—but removing the pressure has the effect of lowering the temperature of the refrigerant. After it leaves the valve, the refrigerant will be at its the coldest. The refrigerant is now ready to move through the indoor evaporator coil, where it will meet warm indoor air and through evaporation lower the temperature of the air.
Live any component inside an air conditioning system, the expansion valve can malfunction, leading to an AC that won’t provide any cooling. Always call on professionals to look your air conditioner when it encounters trouble: a number of different malfunctions might lurk behind the problem, and it takes training to locate the actual cause. If a broken expansion valve is at fault, the technician will repair or replace it.


www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

What does a condenser in an ac unit do?


What does a condenser in an ac unit do?

The condenser does just what the name says: in the condenser the hot gaseous refrigerant coming from the compressor is cooled which causes it to condense into a liquid. Compressing a gas makes it much hotter, enough hotter than the outside air on a hot day that it can transfer its heat to that hot outside air  which makes the hot air even hotter, and cools the high pressure gas enough to make it condense into a fairly warm liquid.
The pressurized liquid refrigerant flows to the evaporator, where it is sprayed through a small nozzle into the evaporator (which is kept at low pressure because the refrigerant pump is constantly sucking on this part of the AC unit.)
When the warm high pressure refrigerant liquid sprays into the low pressure evaporator, it - you guessed it - evaporates. This lowers it temperature a lot, to near or below 0 degrees C. The air you wish to cool is blown over the cold evaporator, and the refrigerant gas gets somewhat warmer.
The warm low pressure refrigerant gas is sucked up and compressed into the condenser. And once it has transferred that heat to the outside air, it condenses, and the cycle repeats.
www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

Types of Valves

Types of Valves

Various types of Valves have been developed to cater to the diversified requirements of fluid control in various applications. These types of valves match the systems, fluids, and environments to accomplish their intended function.

Each type of valve has been designed to meet specific needs. Some valves are capable of throttling flow, other valve types can only stop flow, others work well in corrosive systems, and others valves handle high-pressure fluids. Each valve type has certain inherent advantagesand  disadvantages. Understanding these differences and how they affect the valve’s application or operation is necessary for the successful operation of a facility.

Although all valves have the same basic components and function to control flow in some fashion, the method of controlling the flow can vary dramatically.
Each method controlling flow has characteristics that make it the best choice for a given application of function. One valve may be best fit for one application but may not be fit for other at the same time.


www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

Types of Heat Exchangers used in Hvac system

Types of Heat Exchangers used in Hvac system
Heat exchangers are essential part of any kind of HVAC system nowadays. Heat exchangers contribute substantially towards energy conservation and reduction in energy bills.So what are the different types of heat exchangers that a HVAC system can use? 
The main function of a heat recovery system is to increase the energy efficiency by reducing energy consumption and also by reducing the cost of operating by transferring heat between two gases or fluids, thus reducing the energy bills.
The heat exchangers are the best known devices for this purpose. In heat exchangers, as the name suggests, there is a transfer of energy from one fluid to another. Both these fluids are physically separated and there is no direct contact between the fluids. There are different types of heat exchangers such as shell and tube, U tube, shell and coil, helical, plate etc. The transfer of heat can be between steam and water, water and steam, refrigerant and water, refrigerant and air, water and water. Now let’s take a look as to what are the different types of heat exchangers.

Rotary wheel type heat exchanger
A rotary wheel type heat exchanger has a large surface cylinder which is attached to the shaft. It has got a gas permeable material inside it. When the cylinder rotates, both the gases move in a counter flow pattern axially to the shaft. The heat from the warm gas is absorbed by the gas permeable material and then it is transferred to the colder gas. Sometimes hygroscopic material is put on the gas permeable material to absorb the moisture from the gases. Thus the moist gas becomes dry and transfers the moisture to the dry gas. Both latent and sensible heat is transferred in this system.
Fixed Plate heat exchangers
These types of heat exchangers do not have any moving parts. They have fixed plates that are alternately arranged and are separate from each other. Both the gases and fluids flow separately in these alternate plates and the transfer of heat takes place between them. The flow can be counter flow, parallel flow or cross flow.
Heat pipe exchangers.
This type of heat exchanger has an evaporator and a condenser separated by a plate. It has tubes running parallel and separated from each other. On the evaporator side the hot air transfers its energy to the liquid refrigerant and thus boiling it. The vapor refrigerant now passes through the pipes to the condenser side. The opposite process takes place. The cold air now passes over the vapor refrigerant. The vapor refrigerant after transferring its energy turns to liquid and flows though the pipes to the evaporator side. This type of heat exchanger generally uses parallel flow patterns.
Run- around system
In this type of system, a pump circulates water or any other liquid through the system. There are coils that are mounted in either series or parallel to facilitate maximum amount of heat transfer. This type of system is beneficial in any season. This means that if the outside air is warmer than the exhaust air, the exhaust air pre cools outside air. And if the outside air is cooler than the exhaust air, the exhaust air pre heats the outside air, making the system more and more energy efficient.
Hot gas heat exchanger
The HVAC system’s compressor generates heat by compressing refrigerant. This heat can be captured and used for heating domestic water. For this purpose a heat exchanger is placed in between the compressor and the condenser. The water that is to be heated is circulated though this heat exchanger with the help of a pump whenever the HVAC system is on.
Double bundle condenser heat exchanger
This heat exchanger consists of two sets of water tubes in the condenser shell. The superheated gas is forced into the shell where the transfer of heat to the water takes place through the tubes.
Heat jackets
Water jackets are kept at the sides of a reciprocating engine or a gas turbine to absorb the heat generated. This heat can be used for generating steam or for heating water or fuel oil.
Hot flue gas heat exchangers
The hot flue gases from the boiler exhaust can be used to heat water or fuel oil. An arrangement consisting of a series of pipes or water jackets are made in the boiler exhaust for the transfer of the heat. It can mainly be used to preheat the boiler feed water.
Hot drain heat exchangers
Heat from the hot condensate used in the kitchen, bathrooms or laundry system can be used for boiling water.Condensate is continuously formed when the release of heat takes place. A heat exchanger placed in the condensate return can take the condensate heat for heating water.
Heat pump water heater
The atmosphere of kitchens and laundries is extremely hot. This heat can be used to heat water or for other purposes. This can be done by using a dedicated heat pump that mechanically concentrates the heat in the atmosphere and bring it to the temperature where it can be used.
www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

Refrigerant Leak Detection

Refrigerant Leak Detection
Leak detection is an essential service practice. There are many old and new methods available to assist technicians' eyes and ears in finding leak sites.
All pressurized HVACR systems can eventually leak refrigerant. Therefore, it's the responsibility of the HVACR technician to monitor systems regularly and inspect for leaks.
Although a tight system — with minimal leakage that doesn't affect system performance — may not pose a problem, a more serious leak will do so, and could occur at any time.
Some leaks are plainly visible to the eye. These include a visible line break, the presence of oil, and quite possibly a refrigerant vapor cloud of escaping gas.
An audible leak might also be detected if a system is pressurized and large leaks are present.


www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

Electronic Refrigerant Leak Detectors and Methods

Electronic Refrigerant Leak Detectors and Methods
Other methods include portable, hand-held electronic devices, and fixed system monitors. These are recognized as the quickest, cleanest methods.
A question that's commonly asked is, “Are leak detectors helpful in detecting leaks with all of the new refrigerants and R-22 replacement blends?” With the influx of new refrigerants, following the Environmental Protection Agency-mandated phase-out of chlorodifluoremethane (R-22) and other mandates for CFCs, HCFCs and HFCs, detection products and methods continue to be a challenge. With that in mind, many instrument companies have developed and improved their products to meet the current and even future needs with the refrigerant evolution.
Superior Sensing Devices
State-of-the-art leak detectors are able to identify all CFCs, (those containing chlorine), HCFCs (those containing fluorine) and HFCs (non-ozone-depleting refrigerants and compounds), plus bromine gas (found in HBFCs) and halogens. A superior portable leak detection tool will accurately detect and may identify the smallest of leaks. The ability to target the gases and the severity of the leak is the key to a great detection device. Reliability, longevity, serviceability, and cost should also be considered, yet initial cost alone may not be the best deciding factor.

www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

5 Temmuz 2018 Perşembe

Air Conditioning

Air Conditioning

Central air conditioning systems have become a must-have for year-round comfort, and are frequently installed in conjunction with a central heating system. The two must work together for optimal temperature control, and even share the same ductwork. Most central air conditioners are two-part or split systems, which contain:
• An outdoor unit with compressor, fan, condenser coil, and electrical components.
• An evaporator coil, typically situated on top of your furnace.
• Piping which connects the indoor and outdoor components.
• Refrigerant for cooling.
• Ductwork for air distribution.
• A thermostat for temperature control.
These components work together to provide your home with cool air when the thermostat indicates. When engaged, the air conditioner pulls warm air from the home into the ductwork. At the same time, the refrigerant circulates between the indoor and outdoor components. It absorbs the heat from the air as it passes into the interior evaporator coil from the exterior compressor coil. The cooled air then travels back through the ductwork and is distributed to the various rooms of your home. The cycle continues in order to maintain the desired temperature.

www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

Heating systems

Heating systems

Heating systems can take a couple of different forms. Some are furnaces that burn material to provide heated air through the ductwork, while another popular choice is boilers that heat water for steam radiators, or forced-water systems with baseboard radiators, electric heat, and heat pumps. A furnace will generally operate on natural gas or propane, while a boiler will use gas or oil to heat the water.

Another option is a radiant floor, also known as a hydronic heating system. These use piping under a floor, and are made up of flexible tubes that are filled with water or a glycol solution. These can heat any kind of floor, including concrete, and are an efficient method of providing warmth in a home. They can even be retrofitted into wooden flooring, though they need to be carefully installed in sheathing for wooden floors.

www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

Dıffeent Types Of Hvac Systems

Dıffeent Types Of Hvac Systems

For most people, heating and cooling will account for as much as half of the energy they use. With this in mind, it’s important to choose a HVAC system that will meet your comfort needs, without drawing on excess power and escalating your cost of living.
• People living in hot or cold climates might go for a single stage system, designed to produce just heating or cooling. These tend to be inexpensive, but are also rather inefficient and will typically be working at capacity even when it’s not required.
• More advanced models will offer variable fan speeds to cut down on power use, however they remain inefficient when compared to multi-stage systems, and are thus more expensive to run over the long term.
• Zoned systems, on the other hand, have been designed to heat or cool individual parts of your home. This is done by designing zone valves and dampers inside the vents and ductwork that selectively block the flow of air. For people with larger properties this is of immeasurable value as it prevents the system from heating or cooling areas in the home that are not in use.
• HVAC systems can also be built to offer humidity control, and both humidifiers and dehumidifiers can be added as options to heating and cooling systems. People that live in very dry environments or the tropics find these additions to the system essential. With that being said, some people prefer to install separate humidifier or dehumidifier systems, so that they can manage the humidity of their environment without also having to turn on the air conditioner.



www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

How air conditioning condensers work?


How air conditioning condensers work?

The air conditioner condenser is the system component that removes heat from the system. The condenser is a heat-exchange surface that permits the transfer of heat from the system refrigerant to the air outside. The heat comes from the space that is being cooled and from the heat generated during the compression process. The air outside for residential systems, must be at a lower temperature than the refrigerant to allow heat transfer to occur. This rejection of heat causes the hot vapor refrigerant coming from the compressor to condense. The purpose of the condenser is to condense the refrigerant to a liquid. The temperature at which the refrigerant will condense is called the condenser saturation temperature.

The Condensing Process

The refrigerant leaving the compressor is superheated and well above the saturation temperature, so it must first be cooled before it can condense. The process of removing the superheat from the discharge refrigerant is referred to as desuperheating. The desuperheating process removes superheat and is a sensible heat exchange since it can be measured with a thermometer. Although the temperature is changing, the pressure will remain the same. The purpose of the first process is to reduce the refrigerant to the condenser saturation temperature.
Once the refrigerants temperature drops to its condenser saturation temperature then it will begin to change state. The second process of the condenser is to change the refrigerant from a vapor to a liquid. The refrigerant goes under a latent heat transfer which cannot be measured, when changing from a vapor to a liquid. Since the refrigerant is still warmer then outside it will still continue to give away heat as a liquid. The condenser has condensed the refrigerant.

Subcooling is the third process of the condenser it cools the refrigerant to a temperature below the condenser saturation temperature. One degree of subcooling is one degree below the condenser saturation temperature. Ideal subcooling temperature is about 20 degrees below the saturation temperature. Subcooling gives the system a high-pressure high-temperature liquid to enter the metering device.



www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

Function of Condenser


Function of Condenser
In a cooling cycle of a refrigeration system, heat is absorbed by the vapor refrigerant in the evaporator followed by the compression of the refrigerant by the compressor. The high pressure and high temperature state of the vapor refrigerant is then converted to liquid at the cond. It is designed to condense effectively the compressed refrigerant vapor.
There are basically three types of condensing unit depending on how the heat is removed by the condensing medium which is usually water, air or a combination of both.
  • Air-Cooled types are usually used in the residential and small offices applications. They are used in small capacity systems below 20 tons. The advantages of using this design include not having to do water piping, not necessary to have water disposal system, saving in water costs and not much scaling problems caused by the mineral content of the water. It is also easier to install and has lower initial cost. There isn't much maintenance problems. The disadvantages are that it requires higher power per ton of refrigeration, has shorter compressor life and on days when most cooling is required, the least is available. 

  • The circulation of air-cooled type can be by natural convection or by forced convection (usually using blower or fan). Due to its limited capacity, natural convection is used in smaller applications such as freezers and refrigerators. In forced convection, air is circulated by using a fan or blower that pulls the atmospheric air through the finned coils. Internally, the refrigerant circulates through the coil and air flows across the outside of the tubes.
  • Water-Cooled There are 3 types commonly being used. They are shell and tube, shell and coil, and double tube. The most commonly used is the shell and tube type and are usually available from two tons up to couple of hundred tons. This design has lower power requirements per ton of refrigeration and the compressors can last longer compared to the air-cooled type. A water cooling tower is frequently used for higher capacity application.
  • Evaporative type which is a combination of water and air-cooled.
Air-Cooled and Water-Cooled Comparison Summary
  • Air-cooled type operates at higher head pressure or condensing pressure, hence reducing the capacity of the compressor and increases the power intake. In general, a 2 hp water-cooled system will require the same refrigeration as a 3 hp air-cooled system.
  • The maintenance costs of water-cooled type is about three to four times the air-cooled type. Air-cooled type maintenance is usually limited to regular lubrication of fan and motor bearings. Water-cooled type requires cleaning from algae and bacteria. Scales on the tubes are removed by using acid compound. Proper water treatment is also critical to the operation of the cond.
www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

4 Temmuz 2018 Çarşamba

Different Types of Fans Used in the HVAC Industry

Different Types of Fans Used in the HVAC Industry

In the Middle East, commercial and industrial units are steadily growing and the demand for HVAC products in the area is remains high. To be able to supply the needs of different industries, many HVAC companies make sure that they deliver high quality products, and one of the most important HVAC products are the different types of fans used. In HVAC equipment, there are different types of fans that are used.

 HVAC FAN TYPES 
All types of fans are designed for the sole purpose of delivering air. In an HVAC unit, most furnaces contain one or more fans, and different fans are used for different applications. There are three basic fan types that are usually encountered in the HVAC industry. The Axial Fan, the Forward Curved Centrifugal Fan and lastly, the Backward Inclined Fan.

Axial Fan
Axial fans, also known as propeller fans, are engineered to move a low volume of air under low static conditions (static pressure is the resistance to air flow). These types of fans are low cost, and don’t work well when it faces resistance. Since propeller fans are low cost, most are built to run on Single Phase Voltages. These types of fans are more suited for applications with lower air volumes and pressures.

Axial fans can usually be found positioned on top of an HVAC Rooftop or home compressor that is outside a house. A basic HVAC system which doesn’t run a heat pump is designed with condenser coils which remove heat from an area. These coils have fins that need air to move through them so as to remove heat. Since these sections don’t require a high power fan, an axial fan is the best and most cost efficient solution.

Centrifugal Fan
Centrifugal fans look similar to hamster exercise wheels. These types of fans produce more pressure for a given air volume than axial fans. They are usually noisier as compared to axial fans and are suited for applications with higher air flow volumes and pressures. It has 3 types of drive mechanism: direct, belt, or variable drive. Inside the HVAC Rooftop system, you will find a centrifugal fan. These fans should be strong enough to overcome all the resistance of the room’s duct-work. This is where axial fans are inadequate. Centrifugal fans move a large quantity of air while overcoming all the resistance or static pressure of the duct-work so that it can provide adequate air flow throughout the facility.

Backward Inclined Fans
These types of fans are designed to handle large volumes of clean air as needed in heating, ventilating, and air conditioning systems. These are also used in many industrial air supply and exhaust applications. There are some HVAC Rooftop units and HVAC accessories that may contain one or a series of backward inclined fans.

www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40



+90 553 343 50 40

Chilled-water and Cooling-tower AC Units

Chilled-water and Cooling-tower AC Units
Although standard air conditioners are very popular, they can use a lot of energy and generate quite a bit of heat. For large installations like office buildings, air handling and conditioning is sometimes managed a little differently.
Some systems use water as part of the cooling process. The two most well-known are chilled water systems and cooling tower air conditioners.
• Chilled water systems - In a chilled-water system, the entire air conditioner is installed on the roof or behind the building. It cools water to between 40 and 45 degrees Fahrenheit (4.4 and 7.2 degrees Celsius). The chilled water is then piped throughout the building and connected to air handlers. This can be a versatile system where the water pipes work like the evaporator coils in a standard air conditioner. If it's well-insulated, there's no practical distance limitation to the length of a chilled-water pipe.
• Cooling tower technology - In all of the air conditioning systems we've described so far, air is used to dissipate heat from the compressor coils. In some large systems, a cooling tower is used instead. The tower creates a stream of cold water that runs through a heat exchanger, cooling the hot condenser coils. The tower blows air through a stream of water causing some of it to evaporate, and the evaporation cools the water stream. One of the disadvantages of this type of system is that water has to be added regularly to make up for liquid lost through evaporation. The actual amount of cooling that an air conditioning system gets from a cooling tower depends on the relative humidity of the air and the barometric pressure.
Because of rising electrical costs and environmental concerns, some other air cooling methods are being explored, too. One is off-peak or ice-cooling technology. An off-peak cooling system uses ice frozen during the evening hours to chill interior air during the hottest part of the day. Although the system does use energy, the largest energy drain is when community demand for power is at its lowest. Energy is less expensive during off-peak hours, and the lowered consumption during peak times eases the demand on the power grid.

Another option is geo-thermal heating. It varies, but at around 6 feet (1.8 meters) underground, the earth's temperature ranges from 45 to 75 degrees Fahrenheit (7.2 to 23.8 degrees Celsius). The basic idea behind geo-thermal cooling is to use this constant temperature as a heat or cold source instead of using electricity to generate heat or cold. The most common type of geo-thermal unit for the home is a closed-loop system. Polyethylene pipes filled with a liquid mixture are buried underground. During the winter, the fluid collects heat from the earth and carries it through the system and into the building. During the summer, the system reverses itself to cool the building by pulling heat through the pipes to deposit it underground
For real energy efficiency, solar powered air conditioners are also making their debut. There may still be some kinks to work out, but around 5 percent of all electricity consumed in the U.S. is used to power air conditioning of one type or another, so there's a big market for energy-friendly air conditioning options

www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

Basic Types of Check Valves

Basic Types of Check Valves

It is very important for HVAC mechanical engineer to know about various valves being used in mechanical industry.Various check valve types have been developed to cater to the diversified requirements in piping systems in various applications.These various types of check valves offer many advantages and disadvantages .One type of check valve ideal for one applicationmay be misfit for another application.Plant engineers have to look into many factors to decide which type of valve would be they using in that particular application.


Following are the main check valve types used in various applications.

1. Swing Check Valve
2. Tilting Disk Check Valves
3. Lift Check Valves
4. Piston Check Valves
5. Butterfly Check Valves
6. Stop Check Valves
7. Other Check valve types (Ball check valve, diaphragm check valve etc)


www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

Why we use Check Valves or Non-Return Valves or one way valves?

Why we use Check Valves or Non-Return Valves or one way valves?

Sometimes reverse flow may be detrimental for equipment or process so it needs to be uni-directional for operational safety. This operational safety is accomplished by valve check. Valves check are self actuated and self operating devices.
• Check   Valves   are used to protect the equipment that can be affected by reverse flow, such as flow meters, strainers and flow control valves.
• Check   Valves   are used to check the pressure surges associated with hydraulic forces, for example, water hammer
• Check Valves   are used to prevent the flooding that can take place if flow reversed.
• Check Valves   are used to prevent the reverse flow on system shutdown.
• Check Valves   are used to to prevent the flow under gravity.
• Check Valves   are used for relief of vacuum conditions.


www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40

What is a Check Valve or Non-return valve (NRV)?

What is a Check Valve or Non-return valve (NRV)?

Check valves or non-return valves are self actuated valves and designed to prevent the reversal of flow in a piping system. In other words we can say that Check valves are basically backflow preventers. Valve Check continues to work even if plant loses it power,air supply or hydraulic power source. Even these flow preventers or one way valves do not need operators assistance to function.

How Does  a Check valve Work?

Check valves are activated by the flowing material in the pipeline.This flowing material may be gas,water ,air ,oil or steam in pipeline. The pressure of the fluid passing through the system opens the check valve, while any reversal of flow will close the valve.Opening of valve is basically lifting or swinging of check valve disc thus allowing the flow in one direction.Closure in check valve, for backflow prevention, is accomplished by the weight of the check mechanism, by back pressure, by a spring, or by a combination of these means.

www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40



+90 553 343 50 40

AIR-CONDITIONING SYSTEMS

AIR-CONDITIONING SYSTEMS
The system by which air conditioners provide cooling is called the Refrigerant Cycle. This system has four major components common to all air-conditioning systems. These components and their basic functions are listed below.


1. Compressor
Refrigerant is drawn from the evaporator and pumped to the condenser by the compressor. The compressor also pressurizes the refrigerant vapor so that it will change state (condense) readily.
2. Condenser
The high-pressure refrigerant vapor releases heat through the condenser coils as it condenses into liquid refrigerant. making it easier to vaporize.
3. Metering Device
(capillary tube, txv valve) The metering device restricts the flow of liquid refrigerant from the condenser to the evaporator. As refrigerant passes through the metering device, its pressure decreases.
4. Evaporator
The low-pressure liquid refrigerant absorbs heat as it vaporizes in the evaporator coils.
The process described above is the Refrigerant System or Refrigerant Cycle. It is the system on which virtually all modern Air-Conditioning and refrigeration is based.


www.bilkargroup.com
www.bilkarsogutma.com.tr
info@bilkargroup.com
+90 212 343 50 40
+90 553 343 50 40